Rglvx Wide Silicone Squeegee Mop with Microfiber Sleeve Sand Cream

Overview

One sand-colored manual floor tool with a 42 cm straight silicone squeegee blade on one edge and a clip-on cream microfiber sleeve covering the opposite flat bar. The head pivots at its center and contains no reservoir or wringing mechanism.

Specifications

• Head format: reversible straight squeegee and flat microfiber bar
• Working width: approximately 42 cm
• Squeegee: exactly 1 continuous sand silicone blade
• Blade projection: approximately 2.8 cm
• Flat bar: one sand polypropylene bar with 4 sleeve-retaining points
• Supplied sleeves: exactly 2 matching cream polyester microfiber sleeves
• Retaining clips: exactly 4 sand hinged clips integrated into the bar
• Pivot: one center joint with approximately 120 degrees of movement
• Handle: exactly 3 threaded matte-aluminum sections with sand collars
• Assembled handle length: approximately 130 cm
• End component: exactly 1 sand hanging cap
• Product Net Weight: approximately 0.92 kg including supplied components

Features

• One edge forms a continuous flexible squeegee while the opposite face accepts a fabric sleeve.
• Four clips hold one sleeve flat across the working bar.
• The center pivot changes the head angle without rotating a circular plate.
• No spray reservoir, bucket, sponge block, scrub bristles, floor cleaner, or third sleeve is included.

Package Includes

• 1 sand 42 cm reversible squeegee and flat-bar head
• 1 continuous sand silicone blade
• 4 integrated sand retaining clips
• 3 threaded matte-aluminum handle sections
• 2 matching cream microfiber sleeves
• 1 sand hanging cap
• 1 assembly and care card

Use and Care

Thread the handle sections together by hand and confirm the pivot fastener is secure. For fabric use, fit one clean sleeve evenly under all four clips. For squeegee use, remove loose abrasive debris first and follow the floor or surface manufacturer's guidance. Test on an inconspicuous area and do not assume suitability for every floor coating. Never mix cleaning chemicals. After use, rinse and dry the silicone edge, bar, clips, joint, handle, and sleeves. Store the head clean and dry without folding the blade or trapping a damp sleeve under the clips.